Do Antimicrobial Plastics Work at Refrigeration Temperatures?

ANTIMICROBIAL

Antimicrobial plastics have been used for many years in moulded fridge linings. The potential benefits would appear to make the additional cost worthwhile, but there are a number of important considerations.

Refrigerator with antimicrobial plastic lining

A refrigerator would reasonably be expected to remain in service for perhaps ten years. Silver based antimicrobial additives, such as silver phosphate glass or silver zinc zeolite, would certainly provide adequate longevity, whereas organic antimicrobial alternatives are unlikely to remain active for that length of time. However, the temperature in a refrigerator is notably lower than that at which silver additives tend to be most effective. At the typical refrigeration temperature of 5°C bacteria are not particularly active and silver is most effective when bacteria are undergoing mitosis/cell division, so the efficacy of silver is significantly reduced.

It is worth noting that most silver efficacy data is drawn from standard ISO 22196 tests, which are conducted at 35°C, significantly higher than refrigeration temperature. Antimicrobial plastics which perform well at 35°C will not necessarily perform well at low temperatures…. the only way to be sure is to use a modified test protocol, testing at whatever temperature is relevant to the specific application.

In order to maximise low temperature performance, the choice of antimicrobial plastic becomes more important. Among materials typically used in fridge linings, ABS is probably the most common. Unfortunately, ABS can be quite problematic when used with silver antimicrobial additives, with some grades of ABS performing notably worse than others at a given concentration of antimicrobial. At normal usage temperatures the performance is generally improved by simply increasing the concentration of antimicrobial, but at refrigeration temperatures the loss of perfomance can be too great to overcome economically. The best option is generally to switch to a different grade of ABS.

With careful selection of both antimicrobial additive and polymer, it is certainly feasible to create an antimicrobial plastic that can perform well against bacteria at refrigeration temperatures. Of course, another consideration is the effect of antimicrobial additives on the physical properties of the plastic into which they are incorporated…. but that will be the subject of another post!

LEARN MORE ABOUT ANTIMICROBIAL PLASTICS >>>

  • All
  • ANTIMICROBIAL
  • ELECTRICALLY CONDUCTIVE
  • FEATURED
  • MATERIAL DEVELOPMENT
  • METAL & X-RAY DETECTABLE
  • POLYKETONE
  • SILICONE & RUBBER
  • THERMALLY CONDUCTIVE
All
  • All
  • ANTIMICROBIAL
  • ELECTRICALLY CONDUCTIVE
  • FEATURED
  • MATERIAL DEVELOPMENT
  • METAL & X-RAY DETECTABLE
  • POLYKETONE
  • SILICONE & RUBBER
  • THERMALLY CONDUCTIVE
How to choose an antimicrobial masterbatch for plastics

How to choose an antimicrobial masterbatch for plastics

Choosing an antimicrobial masterbatch involves more than selecting an active. Carrier compatibility, dosage, processing conditions, target organisms, regulation and effects on the finished polymer all ...
READ MORE +

Antimicrobial additives for plastics: comparing silver, copper, zinc and organic technologies

Radical Materials develops antimicrobial polypropylene (PP) masterbatches and compounds for food processing, healthcare, consumer and industrial applications. Discover how polymer grade, antimicrobial technology, processing conditions ...
READ MORE +
metal & x-ray detectable TPU conveyor

Metal & Xray Detectable TPU for Conveyor Belting: What Manufacturers Need to Consider

Metal and X-ray detectable TPU can help reduce contamination risk in conveyor belting, but detection performance must be balanced with the mechanical and processing properties ...
READ MORE +
Antimicrobial polyketone combats e. coli in food processing environments

Antimicrobial polypropylene masterbatch: formulation, performance & applications

Radical Materials develops antimicrobial polypropylene (PP) masterbatches and compounds for food processing, healthcare, consumer and industrial applications. Discover how polymer grade, antimicrobial technology, processing conditions ...
READ MORE +
Antimicrobial polyketone combats e. coli in food processing environments

Antimicrobial polyketone masterbatch for food processing & water applications

Radical Materials has developed an antimicrobial polyketone masterbatch for food processing, water and fluid-handling applications. Tested at 5°C, the technology delivers >99.99% antibacterial efficacy while ...
READ MORE +
Why Thermal Conductivity Alone Doesn’t Tell You Whether a Thermally Conductive Plastic Will Work

Why Thermal Conductivity Alone Doesn’t Tell You Whether a Thermally Conductive Plastic Will Work

When somebody approaches us looking for a thermally conductive polymer, the starting point is often a target thermal conductivity: 2 W/mK, 5 W/mK, 10 W/mK ...
READ MORE +

Why Polymer Development Should Start with the Application, Not the Additive

We regularly receive enquiries that begin with a request for a particular additive. “We need an antimicrobial additive for polypropylene.” “Can you supply something to ...
READ MORE +
white polyketone

Introducing An Unprecedented Pure White Polyketone & overcoming challenges with POM

In the world of engineering polymers, Polyketone (PK) and Polyoxymethylene (POM) are celebrated for their toughness and stability. This month, we are highlighting several breakthrough ...
READ MORE +
Transparent antimicrobial PVC

Antimicrobial PVC Strip Curtains: How to Maintain Clarity and Transparency

Antimicrobial additives have long been employed in PVC strip curtains for use in hygiene sensitive areas including food processing, clean rooms and pharma.
READ MORE +
Radical's z-blade mixtruders produce x-ray & metal detectable silicone & rubber masterbatches & compounds

X-Ray & Metal Detectable Silicone and Rubber for Food Processing Equipment

Detectable properties are often associated with plastic consumables in the food processing industry, required typically in items such as pens and clipboards. In food safety ...
READ MORE +
3D printed x-ray & metal detectable nylon ice cream extruder

3D Printing with X-Ray & Metal Detectable Nylon for Food Processing Components

In order to prevent plastic foreign body contaminants, components utilised on food production lines are frequently made from x-ray or metal detectable nylon. While these ...
READ MORE +

Choosing a Metal Detectable Masterbatch: 4 Things You Need to Consider

It is important to consider several key areas when specifying a metal detectable masterbatch for use in injection moulding and extrusion of detectable polymer products.
READ MORE +
food production equipment using x-ray detectable plastics

Metal Detectable Plastics: Why Detectability and Mechanical Strength Both Matter

Metal & x-ray detectable plastics allow any products which are made from plastics/polymers to be enhanced in terms of their ability to be detectable by ...
READ MORE +
white antimicrobial masterbatch

What Is an Antimicrobial Masterbatch and How Does It Work?

An antimicrobial masterbatch is a mixture of antimicrobial additives that are compounded into a suitable polymer carrier and formed into pellets. This antimicrobial polymer masterbatch ...
READ MORE +
Transparent antimicrobial PVC

Antimicrobial PVC: Why Achieving Good Performance Is More Complicated Than It Looks

Antimicrobial PVC has many applications, but good efficacy is only achieved through the use of additives, since PVC is not inherently antimicrobial.PVC, a versatile polymer, ...
READ MORE +